Suzuki King Quad Tusk SubZero ATV Snow Plow Mount Installation

Suzuki King Quad Tusk SubZero ATV Snow Plow Mount Installation


Today, we’re going over the installation of
the Tusk SubZero plow mount on the Suzuki King Quad. Having the correct tools and some assistance
will make this job a lot easier. For this video, we’ve stood the machine up
so you can see what we’re doing. You need to safely support the machine in
order to gain access to the undercarriage for installation. First, we’re going to remove the stock skid
plate. We do that by removing the six bolts that
hold that on. We used a 10 mm ratchet wrench. We found that worked best. Once those are out, we can go ahead and remove
the stock skid plate. Next thing we’re going to go over is the plow
mount installation. I like to get an idea where the clamps are
going to sit on the frame. That way, I know about where my plow mount’s
going to sit. Now’s a good time to grab a helping hand. They can hold that plow mount up while you
start the threads on the bolts. Just get a couple of threads started on each
bolt. We’re not going to tighten anything just yet. Next thing we need to do is make sure the
plow mount’s sitting straight with the frame. Once you get that lined up with the frame
rails, you can go ahead and tighten the bolts up Make sure you tighten the bolts evenly so
that it’s pulling the clamp straight to the plow mount. Once you’ve finished that, go back over everything. Double check your hardware, make sure everything’s
tight, and enjoy your Tusk SubZero snow plow.

Related Posts

TRIP REPORT: Air Canada ROUGE review – Boeing 767 – Edmonton ✈ Toronto

TRIP REPORT: Air Canada ROUGE review – Boeing 767 – Edmonton ✈ Toronto

Hello my name is Robin and I want to thank you very much for taking the time to watch this

3 Replies to “Suzuki King Quad Tusk SubZero ATV Snow Plow Mount Installation”

Leave a Reply

Your email address will not be published. Required fields are marked *