in this video I’m going to show you the compete design and detailed drawing of flat slab with drop panels also calculation of the sizes the given scenario is shown the Fc’ is 5ksi yield strength of steel is 60 KSI floor height is 10 feet we have to design the first floor the column
president McCain call for a concrete results this year from the new southern policy earlier today he was briefed by the chairman of the Presidential Committee on northern economic cooperation regarding the policy direction for the new year while the administration focused on improving relations with ASEAN in 2019 this year’s goal is on the
For the wooden inlay in the table top I got myself a board made of oak wood, here you can of course use any other kind of wood, but I think oak comes out very well in combination with concrete. I shortened the board to the length of the formwork, so that it fits exactly
Hi everyone, this is Zach with cable wholesale calm we recently mounted a TV on the wall in one of our offices here and thought it would be an awesome opportunity to show you how easy it is to get your TV off a piece of furniture and mount onto the wall We carry three
Hi this is Carl the Landscape Guy. Todays construction video is about setting a precast concrete retaining wall. As you can see, the concrete panels are being delivered and we’ll be installing them right away. I had to order different sizes ranging from two to six feet tall. That’s because the retaining wall will not
The HD-CA5 and HD-CA6 are pin Drive anchors, they’re secured in the hole by hammering this pin, which expands these fingers apart inside of the hole. These are very strong anchors. The real benefit with these anchors in our system is the ability to set the desired length of stud protruding from the wall. Before
The CA-2 concrete anchor and CA3 work by this anvil at the tip being drawn into this sleeve as you tighten the bolt. As the bolt tightens, it spreads the fingers open and seizes itself up in the hole. The nut is backed off the washer, and you have a threaded stud in the concrete.
Here is the HD-CA4. Drill a 1/4 inch hole 1 half inch deep. Clean the masonry dust out of the hole. tap the anchor flush. It will form its way into the hole. as an example we’ll use the HD-CBS1 combination screw. This is for use in any of our 5/16 18 threaded parts. Now